Top Residential Roof Installation Pros In St. Louis, MO

Discover top Residential Roof Installation Contractors in St. Louis, MO. Get expert roofing services with quality materials and trusted local professionals.

Your roof is the first line of defense against St. Louis weather — and St. Louis tests roofs hard. Between spring hail, summer heat that bakes asphalt, and freeze-thaw cycles that stress flashing and decking, a residential roof installation done right is one of the best investments a local homeowner can make. This guide covers what to expect, what materials hold up here, how to pick the right contractor, and what a real installation includes start to finish.

What a Full Residential Roof Installation Actually Includes

A real residential roof installation is not simply nailing new shingles over old ones. A proper install starts with a complete tear-off down to the roof deck. The deck is inspected for soft spots, rot, or water damage, and damaged sheathing is replaced before anything else goes on. From there, the sequence matters: synthetic underlayment over the whole deck, ice-and-water shield in the valleys, eaves, and around any penetrations, then the shingle system installed to manufacturer spec from the bottom up. Ridge caps, step flashing at sidewalls, counter-flashing at chimneys, and properly sealed pipe boots complete the weather barrier. Ventilation is sized and balanced last — intake at the soffits, exhaust at the ridge — so the new roof can breathe and the warranty is not voided on day one.

Layer-overs — installing new shingles over an existing layer — save a few hundred dollars up front and cost more over time. They hide deck damage, add weight, shorten the new shingle's life, and are not allowed under most manufacturer warranty programs. When Revolve Construction installs a residential roof, it starts clean.

Materials: GAF, Owens Corning, CertainTeed, and What Works in St. Louis

The three most widely specified residential shingle systems in the St. Louis market come from GAF, Owens Corning, and CertainTeed. GAF Timberline HDZ is the bestselling shingle in North America for good reason — it has StainGuard Plus algae protection (important in Missouri's humid summers), LayerLock technology for wind resistance up to 130 mph, and a lifetime limited warranty when installed by a GAF Certified contractor. Owens Corning Duration Series shingles offer SureNail technology — a reinforced nailing strip that holds better in high-wind events — and are a strong choice for homeowners who want maximum wind performance. CertainTeed's Landmark series is the preferred choice when color selection and curb appeal drive the decision: it comes in over 30 colors and carries a StreakFighter warranty against algae discoloration.

Metal roofing is a growing segment for St. Louis homes — particularly standing-seam panels on steeper slopes and exposed-fastener panels on outbuildings. Metal handles freeze-thaw cycles better than asphalt, carries 40–50 year lifespans, and is often rated for hail impacts up to 2 inches. The upfront cost is higher, but for homeowners planning a long stay, the math often works.

Cost Factors for a Roof Installation in St. Louis

A typical St. Louis residential roof replacement for a 1,700-square-foot ranch-style home falls between $8,500 and $14,000 as of 2025, depending on several factors: roof pitch (steeper slopes cost more per square), number of existing layers to tear off, amount of decking that needs replacement, the shingle tier selected (three-tab vs. architectural vs. designer), ventilation upgrades needed, and the complexity of the roof geometry (more valleys, hips, and penetrations means more flashing, more time, and more material). Manufacturer system upgrades — synthetic underlayment versus felt, ice-and-water shield coverage, ridge vent type — also move the number. Revolve provides itemized estimates so homeowners know exactly what they are paying for.

Questions to Ask Before Signing With a Roofing Contractor

Not every roofing bid covers the same scope. Before signing, ask: Is the price a full tear-off or a layer-over? Who installs — your own crews or subcontractors? What manufacturer certifications do you carry, and will my warranty be registered with the manufacturer? Will you pull the permit? Who handles cleanup and haul-away? What is the warranty on workmanship, and how long have you been operating in St. Louis? A contractor who cannot answer these questions clearly is not one you want on your roof.

Revolve Construction carries GAF Certified, Owens Corning Preferred Contractor, and CertainTeed Select ShingleMaster credentials — meaning every installation meets the manufacturer's training and installation standards, and your warranty is backed by both the manufacturer and the contractor. Revolve has operated in St. Louis since 2008, completed 6,000+ projects, and holds a BBB A+ rating.

Why Local Experience Matters in St. Louis

St. Louis sits at the intersection of multiple storm corridors. The region averages 3–4 significant hail events per year, severe tornado-producing thunderstorms are common from March through October, and the freeze-thaw cycle from November through March stresses every flashing joint and sealant on your roof. Local contractors know the products that hold up here, the permit requirements that differ between the City of St. Louis and St. Louis County, and which neighborhoods have soils that affect drainage and therefore gutter sizing. Storm chasers who follow insurance money across the country do not. Hiring a contractor with 17+ years of continuous St. Louis roots means accountability — they were here before the storm and will be here after the warranty claim.

Ready to schedule a free roof inspection? Call Revolve Construction at (314) 400-8006 or contact us online. We serve the entire St. Louis metro and Southern Illinois.

Does homeowners insurance cover a new roof installation in St. Louis?

Insurance covers storm-caused damage — hail, wind, falling debris — but not normal wear or age-related replacement. After a qualifying event, Revolve documents the damage to insurer standards and can meet your adjuster on-site. If the damage is covered, installation cost minus your deductible is typically covered under a replacement cost value (RCV) policy.

How long does a residential roof installation take?

Most single-family residential installations are completed in one to two days. Larger or more complex roofs, those with significant deck damage, or those requiring ventilation overhauls may run two to three days. Weather is the primary wild card in St. Louis scheduling.

Do I need a permit for a roof replacement in St. Louis?

Yes, in most jurisdictions in the St. Louis metro — city and county. Revolve handles permit applications as part of the project scope. Requirements differ between the City of St. Louis Building Division and St. Louis County, and some municipalities inside the county have additional overlay requirements.

What warranty comes with a new residential roof?

A manufacturer shingle warranty (typically lifetime limited for architectural shingles) covers material defects. A contractor workmanship warranty covers installation errors — Revolve provides a separate workmanship warranty in writing. Manufacturer system warranties that cover both materials and labor require installation by a certified contractor using manufacturer-specified underlayment and accessories.

Revolve Construction specializes in residential and commercial roofing, siding, gutters, and storm restoration across the St. Louis metro and Southern Illinois.

5.0 Average Rating (25+ Reviews)